WS100 Conformal Coating Stripping & Removal System Video

The WS100 Conformal coating Stripping System has been designed for complete removal & stripping of conformal coating from circuit boards.

The WS100 consists a workstation of four tanks contained behind a safety screen, filled with appropriate stripping materials for the conformal coating material to be removed.

The principle of operation is that the circuit board to be stripped is manually placed by the operator in the first of the tanks for initial ‘rough’ removal and softening of the coating. Each tank has a rinse pipe and solvent pump fitted for gentle circulation and rinsing of the fluid and the operator working behind the safety screen is able to gradually remove the majority of coating, leaving a small amount of residue remaining.

Click for the video for the WS100 Conformal Coating Wet stripping System.

Click for the brochure for the WS100 Conformal coating Wet Stripping system.

Conformal Coating Dip technique: Horizontal dipping

 Automatic Dip Coating is one of the most efficient methods for application of conformal coatings and is excellent for all volume production whether large or small.

The process of dipping a circuit boards into a conformal coating material contained in a tank ensures complete coverage, including underneath components and around difficult large 3D boards and there is no over spray or material wastage

The technique of horizontal dipping allows certain components not to be masked. This conformal coating dipping Video showing the DS101 Conformal Coating Dip system explains vertical and horizontal dipping of PCBs in conformal coating material.

Click here for the conformal coating dip video.