Conformal Coating

Conformal Coating Dipping with silicones operating procedure

conformalcoating — Fri, 05 Aug 2011 04:00:44 +0000

When using silicone conformal coatings with conformal coating dip systems there are several rules that are worth understanding. At the end of a shift you should:

1. Turn off the pump

2. If you are using a solvent-based moisture-cure material, carefully pour solvent over the top of the coating, so that the solvent floats on the coating.

3. Place the lid on the tank and purge with dry air, nitrogen or argon for a short time.

4. Run the air purge continuously to keep positive pressure inside the tank.

Click here for conformal coating dip application.

SCH offer unique quality conformal coating training both on and off site globally.

Contact SCH and ACR for all your conformal coating service, conformal coating Humiseal materials, conformal coating equipment and conformal coating training and consultation.

Conformal Coating Dipping using solvent-free, water based conformal coating materials

conformalcoating — Fri, 05 Aug 2011 04:00:26 +0000

Using waterbased conformal coatings like Humiseal 1H20 AR1 in conformal coating dip systems is easy with a few modifications. Using the water based conformal coatings eliminates solvents and gives a very stable process.

Click here for conformal coating dip application.

SCH offer unique quality conformal coating training both on and off site globally.

Contact SCH and ACR for all your conformal coating service, conformal coating Humiseal materials, conformal coating equipment and conformal coating training and consultation.

Conformal coatings – Dipping Horizontally

conformalcoating — Fri, 05 Aug 2011 00:00:41 +0000

It is prefectly fine to dip printed circuit boards horizontally into conformal coating and achieve the same excellent results.

However, the important factors are conformal coating viscosity, dry time, tank design, accuracy of dip depth and drain angle which will ultimately determine how success the proces is.

Click here for conformal coating dip application.

SCH offer unique quality conformal coating training both on and off site internationally and globally.

Contact SCH and ACR for all your conformal coating service, conformal coating Humiseal materials, conformal coating equipment and conformal coating training and consultation.

Conformal Coating and Dipping.

conformalcoating — Fri, 05 Aug 2011 00:00:37 +0000

Automatic Dip Coating is one of the most efficient methods for application of conformal coatings and is excellent for all volume production whether large or small.

The process of dipping a circuit boards into a conformal coating material contained in a tank ensures complete coverage, including underneath components and around difficult large 3D boards and as an advantage there is no over spray or material wastage.

Click here for conformal coating dip application.

SCH offer unique quality conformal coating training both on and off site internationally and globally.

Contact SCH and ACR for all your conformal coating service, conformal coating Humiseal materials, conformal coating equipment and conformal coating training and consultation.

Conformal coating temperature variation, Humiseal UV40

conformalcoating — Thu, 04 Aug 2011 20:00:02 +0000

The UV40 UV cure conformal coating from Humiseal is a 100% solids material that can be cured with UV light. When applying the conformal coating by selective coating the temperature can affect the viscosity significantly.

Click here for contact details for conformal coatin information on UV40.

SCH offer unique quality conformal coating training both on and off site internationally and globally.

Contact SCH and ACR for all your conformal coating service, conformal coating Humiseal materials, conformal coating equipment and conformal coating training and consultation.

Selective Conformal Coating Application using the MACCS 400 Multi Axis Conformal Coating System

conformalcoating — Thu, 04 Aug 2011 16:00:31 +0000

Advanced Coating Robotics (ACR) offer the complete automated conformal coating solution providing robotic spray, dispense and dipping conformal coating equipment.

Application of conformal coatings using an automatic process can easily be achieved using standard or custom robotic solutions engineered to the customers needs.

Click for conformal coating selective robot systems.

Contact SCH and ACR for all your conformal coating service, conformal coating Humiseal materials, conformal coating equipment and conformal coating training and consultation.

Global and International Conformal Coating Consultation and Training Courses

conformalcoating — Thu, 04 Aug 2011 12:00:45 +0000

Whether your planning to install a conformal coating process or currently use conformal coatings we can help to develop or optimise your process, to ensure you achieve the best possible performance. SCH can offer expert training in all areas of coating including application techniques, material selection, optimisation, health & safety and trouble shooting.

SCH offer unique quality conformal coating training both on and off site internationally and globally.

Contact SCH and ACR for all your conformal coating service, conformal coating Humiseal materials, conformal coating equipment and conformal coating training and consultation.

Solution Provider – Quality Conformal Coating Service

conformalcoating — Thu, 04 Aug 2011 12:00:07 +0000

Your Assurance of Quality

SCH Technologies carry out all conformal coating processing to IPC-A-610 Class III and Mil-I-46058C standard. SCH are qualified to ISO 9001 and ISO14001 and have achieved Investors In People status.

Click for Subcontract Conformal Coating Service

Contact SCH and ACR for all your conformal coating service, conformal coating Humiseal materials, conformal coating equipment and conformal coating training and consultation.

Conformal Coating Dip Systems – Viscosity Control

conformalcoating — Thu, 04 Aug 2011 08:00:32 +0000

There are two methods for controlling viscosity with conformal coating materials and dip coating applications.

The first is flow cup control which is a manual process. A cup of known size with a hole in the centre is filled with the conformal coating and the time for the material to run out is related to viscosity. This is reasonably accurate and normally is suitable for most applications.

An alternative is inline viscosity control of the conformal coating where the solvent evaporation and material top up is controlled by a viscometer and plc controlled system. This is extremely accurate and removes all of the manual processes involved in testing with a flow cup.

Click here for conformal coating dip application.

SCH offer unique quality conformal coating training both on and off site globally.

Contact SCH and ACR for all your conformal coating service, conformal coating Humiseal materials, conformal coating equipment and conformal coating training and consultation.

Equipment Manufacturer with Conformal Coating

conformalcoating — Thu, 04 Aug 2011 08:00:00 +0000

SCH Technologies provide a full range of conformal coating application equipment and conformal coating systems.

These conformal coating machines have been designed by our engineers and tested in our conformal coating service to ensure they are both practical and cost efficient.

Our range of conformal coating equipment offers both batch systems for the low and medium user and inline SMEMA conformal coating systems for high volume requirements.

Click for conformal Coating Equipment.

Contact SCH and ACR for all your conformal coating service, conformal coating Humiseal materials, conformal coating equipment and conformal coating training and consultation.