How do you control the conformal coating thickness in the dipping process and what is the tolerance of the coating thickness?
Controlling the thickness of a conformal coating applied to a printed circuit board using an automated dip coating process is straightforward.
Click Conformal Coating Dipping FAQs to find out more about this and other issues relating to the process.
About Dr Lee HitchensDr Hitchens has been working in the electronics industry and the area of conformal coatings for over 25 years in various areas including sales and technical support. He has also been training people for almost the same amount of time in all areas of conformal coating whether that is materials & equipment selection, process development or troubleshooting to help them solve their particular problem. Recently, he decided that the industry needed a specific place where all of the useful knowledge on conformal coatings could be collated for users to find easily and use in their own production process. So, Nexus was born and he began the Nexus eBook project.
- Why does the solids content of my conformal coating matter for costing a printed circuit board for application?
- What are the main uses of Molecular vapor deposition (MVD) in protecting components?
- Requirements for setting up a conformal coating facility
- Three key points you should know about polyurethane conformal coatings when using them for protecting electronic circuit boards
- What are conformal coating masking boots and why do they save you money?
- What are the different methods available for cleaning electronic circuit boards?
- The science behind fluoropolymer coatings for protecting electronic circuit boards
- Five key facts about Parylene when protecting printed circuit board assemblies
- Five key facts about using fluoropolymer Nano-coatings for protecting printed circuit boards
- Three key reasons to use a Molecular Vapor Deposition (MVD) process to protect a circuit board instead of conformal coatings
- Nexus article on, “Outsourcing your conformal coating project – The key points”
- What is a fluoropolymer nano coating and how can it protect my circuit board?
- Do you need UL qualification for your conformal coating?
- How do I selective apply my conformal coating?
- How do conformal coating masking boots save money in your production process?
- Why does the solids content of my conformal coating matter for costing a printed circuit… conformalcoating.wordpress.com/2017/08/15/why… https://t.co/2jxNtgQNDK 1 day ago
- What are the main uses of Molecular vapor deposition (MVD) in protecting components? #SCHTech #conformalcoating... fb.me/7Q1qbZPz7 2 weeks ago
- What are the main uses of Molecular vapor deposition (MVD) in protecting components? conformalcoating.wordpress.com/2017/08/01/wha… https://t.co/7NgxHmozT2 2 weeks ago
- Requirements for setting up a conformal coating facility #SCHUK #SCHTech #conformalcoatingfacility... fb.me/6UMFjX9K6 3 weeks ago
- Requirements for setting up a conformal coating facility conformalcoating.wordpress.com/2017/07/24/req… https://t.co/Kba3mOLQcN 3 weeks ago
adhesion AOI application Automated conformal coating inspection boots caps CB100 coatings coating service coating services Conformal coating conformal coating inspection conformal coating materials conformal coatings conformal coating standards corrosion curing defect design design rules dip dipping dots drying DS101 EMI encapsulates equipment exhibitions failure mechanism failure mechanisms horitzontal Humiseal inspection IPC-A-610 standards machine masking masking boots materials Nexus outsource paints parylene plugs potting compounds process reliability removal RFI robot robotic SCH Tech SCH UK selective shielding solvent monitoring spray spray booth spray equipment spraying standards stripping subcontract subcontract conformal coating service system tapes thickness training UV UV40 UV conveyor UV cure UV curing valve valves