What is the right selective robotic conformal coating system for my material?

A selective conformal coating machine should comprise essentially of three main components:

  1.  The valves and fluid system, which deliver the conformal coating material in the required areas on the printed circuit board
  2. The robot platform itself, responsible for delivering the valves to the correct location accurately and in an extremely repeatable fashion.
  3. A software interface that enables simple programming by an operator, to then control both the robot and the fluid system, to ensure that the coating material is consistently dispensed in the specified locations, and areas required to be left coating free, are indeed left coating free.

To learn more about the valves click Choosing the Right Valve for a Selective Robotic Conformal Coating Application Process

Tags: , , , , , ,

About Dr Lee Hitchens

Dr Hitchens has been working in the electronics industry and the area of conformal coatings for over 25 years in various areas including sales and technical support. He has also been training people for almost the same amount of time in all areas of conformal coating whether that is materials & equipment selection, process development or troubleshooting to help them solve their particular problem. Recently, he decided that the industry needed a specific place where all of the useful knowledge on conformal coatings could be collated for users to find easily and use in their own production process. So, Nexus was born and he began the Nexus eBook project.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: