July 24, 2017  

Requirements for setting up a conformal coating facility

The set up of a conformal coating production line regardless of the application method has many similar characteristics.

Any coating facility will need the basic requirements put in place that would be standard for any piece of electronic manufacturing process.

These include ESD systems, facilities for the machines, the environmental requirements and the normal Health & Safety (HSE) considerations.

Also, the conformal coating production line, whether it is an operator manually brush coating printed circuit boards (PCBs) or an inline robotic spray coating process is typically made up of several stages.

These stages are shown below:

Not all the stages are mandatory or may be required.  However, each should be considered on an individual basis.

Want to find out more about setting up a conformal coating facility?

Download our technical bulletin on setting up a conformal coating application process.

Or, contact us to discuss your needs and let us explain how we can help you.

Contact us now.

Tags: , , ,

About Dr Lee Hitchens

Dr Hitchens has been working in the electronics industry and the area of conformal coatings for over 25 years in various areas including sales and technical support. He has also been training people for almost the same amount of time in all areas of conformal coating whether that is materials & equipment selection, process development or troubleshooting to help them solve their particular problem. Recently, he decided that the industry needed a specific place where all of the useful knowledge on conformal coatings could be collated for users to find easily and use in their own production process. So, Nexus was born and he began the Nexus eBook project.

Leave a comment